First Star Kitchen Cabinets: The Countertop Comes First

The decision for this particular color

First Star can be considered for kitchen cabinets if its color and depth suit the space; the first design question is an almost-white gray beside white trim. First Star is deep enough to be a gray-white rather than one of the highest-reflectance whites.

Why the white doors and silver-gray tile relationship matters

White doors offer a stable comparison for deciding whether the gentle gray boundary is visible enough from the entrance.

First Star has an LRV of 69; Sherwin-Williams Eider White SW-7014 is 73. The difference is 4 points, with Eider White returning more light under the reference measurement.

Put the countertop and lower door together

Fit the First Star sample against the countertop and the existing appliance or cabinet white. Check the long horizontal joint as well as a corner. Close whites can disagree across a full cabinet run even when separate chips look similar, so approve that boundary before considering hardware.

Color approval and cabinet performance are separate

View the wall and doors from the room entrance; keep First Star if the gentle separation is sufficient. The coordinating color options covers that related choice.

Select a coating intended for the actual cabinet surface and follow its preparation, priming and cure instructions. The SW-7646 color code does not establish adhesion, stain resistance or cleaning performance. Approve the intended sheen on a sample door; reflections on a finished cabinet can differ from those on a flat wall board. The wood-floor pairing guide covers that related choice. Before ordering samples, compare room-planning features in the paint color visualizer roundup.